Amplified HD Indoor Outdoor Digital TV Antenna, 180+ Mile Range, Support 4K

Description

Setup & Installation Guide
1. Visit http://dtv.gov/maps to confirm available channels in your area, it’s simple and the information is useful.
2. Please make sure your TV has a HDTV Tuner/Digital STB. Ensure you have a Digital HD receiver otherwise no HD channels can be viewed.
3.Connect the antenna coaxial cable to the ANT IN or CABLE IN port on the back of your TV.
4. In the TV’s setup menu, change the scan type to "Antenna" Or "Air" .
5.In the TV setup menu,set TV to scan or channels.
6.Place the antenna in an optimal position, usually on a wall or window. Locate the signal’s best and stick on there.Note: Always remember re-scan for channels after moving the antenna .
7. If you can’t receive channels or receive less channels with current range,please turn the amplifier to another range,and you should have to search again after switching.
Antenna Specifications
Frequency:VHF (170-240Mhz) / UHF(470-860Mhz )
VSWR:≤2.0 : 1
Impedance:75Ω
LNA Gain:25dB OR 5dB
Connector:Fmale
Cable:SYV75-2/Black L=5M
Polarization:Linear
Voltage/Current: 5V/1A
Power Supply Connector:USB